The Home Fire Safety Program is a comprehensive safety check led by the Fire Prevention Branch to educate residents living in the Regional Municipality of Wood Buffalo (RMWB) of potential fire risks within their homes. The program identifies fire and injury hazards in the home, as well as offers free smoke and carbon monoxide alarms in homes without them, or to replace those that do not work or are outdated.
Download our Homeowners Fire Prevention Guide
Thickwood neigbourhoods of Elmore, Hillcrest and Cedarwoods identified for assessments in 2024
Each year, select neighbourhoods are targeted by the Home Fire Safety Program for potential smoke and carbon monoxide alarm replacements. Beginning in May, inspections and information will be offered to residences in these areas: Elmore, Hillcrest and Cedarwoods.
If preferred, an online checklist assessment can be filled out as an alternate option. Please note, hardwired replacement alarms may require installation by a certified electrician and the property owner's consent for replacement.
Home Fire Safety Online checklist
Tips for your smoke and carbon monoxide alarm
How to test and maintain your smoke alarm |
Test your smoke alarm at least once a month by pressing the test button. Make sure everyone in the house is familiar with the sound of the smoke alarm and knows what to do when it sounds. Follow the manufacture instructions for cleaning which may include vacuuming the alarm once a month. If the smoke alarm has batteries, replace them every 6 months. |
Smoke alarms expire after 10 years |
To see if your smoke alarm has expired, twist the alarm off the base to look for the manufactured date. This date may be found on the side or the back of the alarm. The smoke alarms expire 10 years after the manufactured date. If you can’t find a date, this could mean that it was manufactured over ten years ago and it is a safe option to replace them. |
Is your smoke alarm hardwired? |
If your smoke alarm is hardwired, that means it is connected to an electrical circuit in your home and should be interconnected to the other hardwired smoke alarms so if one sounds, they all sound. To replace this alarm, you may want to contact an electrician to ensure new alarms are compatible and installed properly. |
How to change your smoke alarm |
First, check to see if your smoke alarm is hardwired or battery operated. If it is battery operated, it will be mounted directly to a wall or ceiling and not connected to any wires. Follow the manufacture instructions for placement. If it is hardwired, it will be mounted onto an electrical box where the wires are connected to an electrical circuit. If there is more than one hardwired smoke alarm, they should be interconnected so when one sounds, they all sound. You may want to contact an electrician to ensure new smoke alarms are compatible and installed properly. |
Where to install the carbon monoxide alarms in your home |
Carbon monoxide alarms should be installed in central locations outside each sleeping room and on every level of the home. Test your carbon monoxide alarms at least once a month by pressing the test button. Make sure everyone in the house is familiar with the sound of the carbon monoxide alarm. |
How often you should replace your carbon monoxide alarms |
Replace the alarms every 10 years or as recommended by the manufacture. If the carbon monoxide alarm intermittently beeps, check for low batteries and replace if needed. If the CO alarm sounds, immediately move to a fresh air location (outdoors or by an open window or door) and call 911. |
Other home fire safety information
Fire pits |
For more information on fire pit permits and permit conditions, please visit Recreational Fires and Fire Pits. |
Fire extinguishers |
Fire extinguishers can be used to put out a small fire or contain a fire until the fire department arrives. But because fires grow and spread so fast, the number one priority for residents is to get out safely. You should not attempt to fight even a small fire until people have safely escaped the area and the fire department has been called. OperationUse the acronym P.A.S.S. to remember the fire extinguishing sequence: P - Pull the pin in the handle. Fire Extinguisher Types
Safety Tips
|
Escape planning |
Safety Tips
If the Alarm Sounds
Create a Plan
|
For more information, contact the Fire Prevention Branch at 780-743-7000.